Family Overview
Vertical milling indexable inserts and tool holders that support a variety of threads, grooves, chamfers, and more.
Features:
- Ground profile inserts for high precision and excellent performance
- Working at high machining parameters, with high surface quality
- Solid and accurate clamping method enables full repeatability
- Same insert can be used for both right-hand and left-hand threads
The following product lines can used for grooving:
CHAMFERING AND GROOVING INSERTS (SINGLE FLUTE)
A line of inserts that support both chamfering and grooving jobs.
Carbide Grade(s):
CHAMFERING, GROOVING, AND BORING INSERTS (MULTI FLUTE)
A line of inserts that can handle chamfering, grooving, and boring jobs.
Features:
- Multi (5-6) flutes
Carbide Grade(s):
CHAMFERING, GROOVING, AND BORING INSERTS (MULTI FLUTE, DOVETAIL 45°)
A variation of the previous line, the geometry of these inserts has been redesigned to support dovetail operations.
Features:
- Multi (6) flutes
Carbide Grade(s):
GROOVE MILLING INSERTS (SINGLE FLUTE)
Inserts optimized for groove milling operations. A time proven, single flute design allows the inserts to be highly cost-effective.
Features:
- Minimum groove diameter: 10 mm
Carbide Grade(s):
GROOVE MILLING INSERTS (SINGLE FLUTE, DIN 471/472)
A line of inserts designed for groove milling operations. The groove widths, and other dimensions of these inserts are specially optimized towards the production of circlip rings (also known as C-clips, snap rings, or shaft retaining rings), based on the DIN 471/472 standard.
Features:
- Minimum groove diameter: 10 mm
- Nominal groove width: From 0.8 mm
Carbide Grade(s):
GROOVE MILLING INSERTS (MULTI FLUTE)
A new generation of groove milling CMT inserts, engineered for high performance. The multiple, spiral flutes allow for shorter cycle times.
Features:
- Multi (5-6) flutes
- Minimum groove diameter: 17 mm
Carbide Grade(s):
GROOVE MILLING INSERTS (MULTI FLUTE, DIN 471/472)
A new generation of groove milling CMT inserts. The groove widths, and other dimensions of these inserts are specially optimized towards the production of circlip rings (also known as C-clips, snap rings, or shaft retaining rings), based on the DIN 471/472 standard.
Features:
- Multi (6) flutes
- Minimum groove diameter: 20 mm
- Nominal groove width: From 1.10 mm
Carbide Grade(s):
FULL RADIUS GROOVE MILLING INSERTS (SINGLE FLUTE)
A line of groove milling inserts that produce round (“full radius”) grooves.
Features:
- Minimum groove diameter: 12.4 mm
Carbide Grade(s):
FULL RADIUS GROOVE MILLING INSERTS (MULTI FLUTE)
A variant of groove milling CMT inserts, that produce round (“full radius”) grooves. The multiple, spiral flutes allow for shorter cycle times.
Features:
- Multi (6) flutes
- Minimum groove diameter: 20 mm
Carbide Grade(s):
STEEL TOOL HOLDERS
Features:
- Internal Coolant
- Weldon Shank
CARBIDE SHANK TOOL HOLDERS
Features:
- Internal Coolant
MODULAR TOOL HOLDERS (SRCM)
A modular tooling system that enables the customer to conveniently use a wide set of tools, optimized for various applications. This allows for a substantial reduction of tool inventory, and eliminates the need for custom tools.
Every modular CMT tool can be used with an extension from the Carmex Deep Reach family, or with common steel/carbide extensions by other manufacturers. The holders accept standard CMT inserts (types C25 or S35).
Features:
- Rigid tool assembly enables the cutting depth to be increased without compromising stability
- Internal Coolant