BACK TO A-Z SEARCH
Family Overview
A new generation of CMT-based indexable milling inserts and holders (= cutters) for Threading, Grooving, and Chamfering. Each cutter holds several inserts, helping to achieve high productivity.
Insert Features:
- Fully ground profile inserts
- Compatible with a wide range of materials and applications
- Three cutting edges on each insert
- Smooth cutting operation achieved by spiral inserts
Cutter Features:
- Coated with a special, silver-colored, layer for high corrosion resistance
- The coating also provides additional protection against cutting burrs
This family includes the following product lines:
GROOVE MILLING INSERTS
A line of groove milling inserts, capable of cutting a wide variety of grooves. The groove width can range from 1.4 mm to 4.35 mm.
Features:
- Groove interchangeable with the DIN 471/472 series
- Right-hand cutting only
Carbide Grade(s):
GROOVE MILLING INSERTS WITH CHAMFER
A line of groove milling inserts, capable of cutting a wide variety of grooves – as well as perform an additional chamfering operation. The groove width can range from 1.2 mm to 4.25 mm.
Features:
- Groove interchangeable with the DIN 471/472 series
- One insert can perform both grooving & chamfering
- Right-hand cutting only
Carbide Grade(s):
CHAMFERING INSERTS
A line of inserts designed to perform chamfering operations.
Features:
- Right-hand cutting only
Carbide Grade(s):
THREADING INSERTS (PARTIAL PROFILE)
60° partial profile spiral milling inserts, compatible with a variety of pitches, and ISO and UN thread profiles.
Features:
- Each insert supports both internal and external threads
Carbide Grade(s):
MILLING CUTTERS - ARBOR
Features:
- 4 inserts per holder
- To be used with standard Carmex CMT holders (coded S35)
- Right hand cutting only
MILLING CUTTERS - SHELL MILL
Features:
- 6 inserts per holder
- Right hand cutting only
MILLING CUTTERS - WELDON SHANK
Features:
- 4 inserts per holder
- Right hand cutting only
MILLING CUTTERS - DISC MILLING
Features:
- 4 inserts per holder
- Right hand cutting only
Note:
- Compatible only with Groove Milling inserts!
(not to be used with other product lines)