CMT Vertical Milling

Versatile, cost-effective inserts that support a wide range of pitches, and thread diameters.

Features:

• Each insert supports both Internal and External threads

Carbide Grade(s):

The next generation of partial profile CMT thread milling inserts, capable of completing a wide variety of threading jobs. These inserts enjoy a longer tool life than their straight flute counterparts, while offering reduced cycle times.

Features:

• Multi-flute: 4 – 8 cutting edges
• Spiral flutes for smooth cutting, and low cutting forces
• Superb surface finish
• Each insert supports both Internal and External threads

Carbide Grade(s):

Full profile threading inserts for improved performance.

Features:

• Optimal price-perfomance ratio
• Each insert supports both Internal and External threads

Carbide Grade(s):

The next generation of full profile CMT thread milling inserts, engineered for maximum performance. These inserts enjoy a longer tool life than their straight flute counterparts, while offering reduced cycle times.

Features:

• Multi-flute: 4 – 8 cutting edges
• Spiral flutes for smooth cutting, and low cutting forces
• Superb surface finish

Carbide Grade(s):

A line of inserts that support both chamfering and grooving jobs.

Carbide Grade(s):

A line of inserts that can handle chamfering, grooving, and boring jobs.

Features:

• Multi (5-6) flutes

Carbide Grade(s):

A variation of the previous line, the geometry of these inserts has been redesigned to support dovetail operations.

Features:

• Multi (6) flutes

Carbide Grade(s):

Inserts optimized for groove milling operations. A time proven, single flute design allows the inserts to be highly cost-effective.

Features:

• Minimum groove diameter: 10 mm

Carbide Grade(s):

A line of inserts designed for groove milling operations. The groove widths, and other dimensions of these inserts are specially optimized towards the production of circlip rings (also known as C-clips, snap rings, or shaft retaining rings), based on the DIN 471/472 standard.

Features:

• Minimum groove diameter: 10 mm
• Nominal groove width: From 0.8 mm

Carbide Grade(s):

A new generation of groove milling CMT inserts, engineered for high performance. The multiple, spiral flutes allow for shorter cycle times.

Features:

• Multi (5-6) flutes
• Minimum groove diameter: 17 mm

Carbide Grade(s):

A new generation of groove milling CMT inserts. The groove widths, and other dimensions of these inserts are specially optimized towards the production of circlip rings (also known as C-clips, snap rings, or shaft retaining rings), based on the DIN 471/472 standard.

Features:

• Multi (6) flutes
• Minimum groove diameter: 20 mm
• Nominal groove width: From 1.10 mm

Carbide Grade(s):

A line of groove milling inserts that produce round (“full radius”) grooves.

Features:

• Minimum groove diameter: 12.4 mm

Carbide Grade(s):

A variant of groove milling CMT inserts, that produce round (“full radius”) grooves. The multiple, spiral flutes allow for shorter cycle times.

Features:

• Multi (6) flutes
• Minimum groove diameter: 20 mm

Carbide Grade(s):

Carbide Grade(s):

A line of inserts specially designed to perform rounding operations on external, sharp corners.

Carbide Grade(s):

A second generation of inserts specially designed to perform rounding operations on external, sharp corners. The multiple spiral flutes allow for improved performance, and a longer tool life.

Features:

• Multi (5) flutes

Carbide Grade(s):

Corner rounding inserts, compatible with both front and back operations.

Carbide Grade(s):

Corner rounding inserts, compatible with both front and back operations. This version comes with multiple spiral flutes that extend the tool life expectancy, and improve performance.

Features:

• Multi (6) flutes

Carbide Grade(s):

A line of multi-flute inserts for machining roughing applications.

Features:

• Multi (6) flutes

Note:

• These inserts are compatible only with a subset of the available CMT tool holders. The matching holders can be viewed via the dedicated CMT Roughers page (to do so, click on one of the Catalog buttons).

Carbide Grade(s):

Multi-flute inserts designed for efficient execution of finishing tasks.

Features:

• Multi (6) flutes

Note:

• These inserts are compatible only with a subset of the available CMT tool holders. The matching holders can be viewed via the CMT Roughers page (to do so, click on one of the Catalog buttons).

Carbide Grade(s):