CBN Inserts

IconBACK TO A-Z SEARCH

Family Overview

The polycrystalline cubic boron nitride (CBN) inserts offer a high level of hardness, as well as thermal shock resistance. Although CBN’s exceptional toughness/hardness is still less than the diamond-based materials, it provides superior resistance to high temperatures. They can be used at very high cutting speeds.

This makes CBN inserts the ideal cutting material for machining of hardened steels (45-72 HRC) of any kind: Case hardened steel, tool steel, heat treated steel, etc. Additionally, it is also well suited to the machining of applications in which carbide and ceramic cutting tools often reach their limits, such as cast materials, and special alloys. They are compatible with standard tool holders by other, leading manufacturers.

Image

CCGW INSERTS

A line of inserts with a 80° cutting corner angle, and two cutting tips. These inserts have a neutral rake angle, and a relief angle of 7°.

Features:

  • Wiper geometry versions available

Notes:

  • The CCGW 060201 and CCGW 09T301 inserts are only available in CH25 and CK65 grades
  • The CCGW 09T302-W wiper insert is only available in CP25 / CP45 / CK65 / CK85 grades

Carbide Grade(s):

Uncoated carbide grade, suitable for continuous cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of grey & chilled cast iron, sintered steels, Ni-/Co-/Fe-based alloys, Stellite™, and titanium.
Uncoated carbide grade, suitable for interrupted cutting of grey cast iron, ductile graphite iron, and chilled cast iron.
Suitable for continuous cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of certain hardened steels in the 45-72 HRC range, including: Low-alloy tool steels (up to 68 HRC), and high-alloy & powdered steels (up to 72 HRC).
Suitable for interrupted cutting of most hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), and cold worked & hot formed tool steels (up to 64 HRC).
Image

CDGW INSERTS

A line of inserts with a 80° cutting corner angle, and two cutting tips. These inserts have a neutral rake angle, and a relief angle of 15°.

Carbide Grade(s):

Suitable for continuous or interrupted cutting of certain hardened steels in the 45-72 HRC range, including: Low-alloy tool steels (up to 68 HRC), and high-alloy & powdered steels (up to 72 HRC).
Image

CNGA INSERTS

A line of inserts with a 80° cutting corner angle, and two cutting tips. These inserts have a neutral rake angle, and a relief angle of .

Features:

  • Wiper geometry versions available

Carbide Grade(s):

Uncoated carbide grade, suitable for continuous cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of grey & chilled cast iron, sintered steels, Ni-/Co-/Fe-based alloys, Stellite™, and titanium.
Uncoated carbide grade, suitable for interrupted cutting of grey cast iron, ductile graphite iron, and chilled cast iron.
Suitable for continuous cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of certain hardened steels in the 45-72 HRC range, including: Low-alloy tool steels (up to 68 HRC), and high-alloy & powdered steels (up to 72 HRC).
Suitable for interrupted cutting of most hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), and cold worked & hot formed tool steels (up to 64 HRC).
Image

DCGW INSERTS

A line of inserts with a 55° cutting corner angle, and two cutting tips. These inserts have a neutral rake angle, and a relief angle of 7°.

Features:

  • Wiper geometry versions available

Note:

  • The DCGW 070201 and DCGW 11T301 inserts are only available in CH25 and CK65 grades

Carbide Grade(s):

Uncoated carbide grade, suitable for continuous cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of grey & chilled cast iron, sintered steels, Ni-/Co-/Fe-based alloys, Stellite™, and titanium.
Uncoated carbide grade, suitable for interrupted cutting of grey cast iron, ductile graphite iron, and chilled cast iron.
Suitable for continuous cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of certain hardened steels in the 45-72 HRC range, including: Low-alloy tool steels (up to 68 HRC), and high-alloy & powdered steels (up to 72 HRC).
Suitable for interrupted cutting of most hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), and cold worked & hot formed tool steels (up to 64 HRC).
Image

DNGA INSERTS

A line of inserts with a 55° cutting corner angle, and two cutting tips. These inserts have a neutral rake angle, and a relief angle of .

Features:

  • Wiper geometry versions available

Note:

  • The DNGA 150401 insert is only available in CH25 and CK65 grades

Carbide Grade(s):

Uncoated carbide grade, suitable for continuous cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of grey & chilled cast iron, sintered steels, Ni-/Co-/Fe-based alloys, Stellite™, and titanium.
Uncoated carbide grade, suitable for interrupted cutting of grey cast iron, ductile graphite iron, and chilled cast iron.
Suitable for continuous cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of certain hardened steels in the 45-72 HRC range, including: Low-alloy tool steels (up to 68 HRC), and high-alloy & powdered steels (up to 72 HRC).
Suitable for interrupted cutting of most hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), and cold worked & hot formed tool steels (up to 64 HRC).
Image

RCGW INSERTS

A line of round, full-face inserts with a relief angle of 7°.

Carbide Grade(s):

Uncoated carbide grade, suitable for continuous or interrupted cutting of grey & chilled cast iron, sintered steels, Ni-/Co-/Fe-based alloys, Stellite™, and titanium.
Suitable for continuous or interrupted cutting of certain hardened steels in the 45-72 HRC range, including: Low-alloy tool steels (up to 68 HRC), and high-alloy & powdered steels (up to 72 HRC).
Image

TCGW INSERTS

A line of inserts with a 60° cutting corner angle, and three cutting tips. These inserts have a neutral rake angle, and a relief angle of 7°.

Note:

  • The TCGW 090201 and TCGW 110201 inserts are only available in CH25 grade

Carbide Grade(s):

Uncoated carbide grade, suitable for continuous cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of grey & chilled cast iron, sintered steels, Ni-/Co-/Fe-based alloys, Stellite™, and titanium.
Uncoated carbide grade, suitable for interrupted cutting of grey cast iron, ductile graphite iron, and chilled cast iron.
Suitable for continuous cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of certain hardened steels in the 45-72 HRC range, including: Low-alloy tool steels (up to 68 HRC), and high-alloy & powdered steels (up to 72 HRC).
Suitable for interrupted cutting of most hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), and cold worked & hot formed tool steels (up to 64 HRC).
Image

TNGA INSERTS

A line of inserts with a 60° cutting corner angle, and three cutting tips. These inserts have a neutral rake angle, and a relief angle of .

Carbide Grade(s):

Uncoated carbide grade, suitable for continuous cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of grey & chilled cast iron, sintered steels, Ni-/Co-/Fe-based alloys, Stellite™, and titanium.
Uncoated carbide grade, suitable for interrupted cutting of grey cast iron, ductile graphite iron, and chilled cast iron.
Suitable for continuous cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of certain hardened steels in the 45-72 HRC range, including: Low-alloy tool steels (up to 68 HRC), and high-alloy & powdered steels (up to 72 HRC).
Suitable for interrupted cutting of most hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), and cold worked & hot formed tool steels (up to 64 HRC).
Image

TPGW INSERTS

A line of inserts with a 60° cutting corner angle, and a single cutting tip. These inserts have a neutral rake angle, and a relief angle of 11°.

Carbide Grade(s):

Suitable for continuous or interrupted cutting of certain hardened steels in the 45-72 HRC range, including: Low-alloy tool steels (up to 68 HRC), and high-alloy & powdered steels (up to 72 HRC).
Image

VCGW INSERTS

A line of inserts with a 35° cutting corner angle, and two cutting tips. These inserts have a neutral rake angle, and a relief angle of 7°.

Note:

  • The VCGW 070201, VCGW 110301 and VCGW 160401 inserts are only available in CH25 and CK65 grades

Carbide Grade(s):

Uncoated carbide grade, suitable for continuous cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of grey & chilled cast iron, sintered steels, Ni-/Co-/Fe-based alloys, Stellite™, and titanium.
Uncoated carbide grade, suitable for interrupted cutting of grey cast iron, ductile graphite iron, and chilled cast iron.
Suitable for continuous cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of certain hardened steels in the 45-72 HRC range, including: Low-alloy tool steels (up to 68 HRC), and high-alloy & powdered steels (up to 72 HRC).
Suitable for interrupted cutting of most hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), and cold worked & hot formed tool steels (up to 64 HRC).
Image

VNGA INSERTS

A line of inserts with a 35° cutting corner angle, and two cutting tips. These inserts have a neutral rake angle, and a relief angle of .

Carbide Grade(s):

Uncoated carbide grade, suitable for continuous cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of grey & chilled cast iron, sintered steels, Ni-/Co-/Fe-based alloys, Stellite™, and titanium.
Uncoated carbide grade, suitable for interrupted cutting of grey cast iron, ductile graphite iron, and chilled cast iron.
Suitable for continuous cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of certain hardened steels in the 45-72 HRC range, including: Low-alloy tool steels (up to 68 HRC), and high-alloy & powdered steels (up to 72 HRC).
Suitable for interrupted cutting of most hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), and cold worked & hot formed tool steels (up to 64 HRC).
Image

WCGW INSERTS

A line of inserts with a 80° cutting corner angle, and three cutting tips. These inserts have a neutral rake angle, and a relief angle of 7°.

Carbide Grade(s):

Suitable for continuous or interrupted cutting of certain hardened steels in the 45-72 HRC range, including: Low-alloy tool steels (up to 68 HRC), and high-alloy & powdered steels (up to 72 HRC).
Image

WNGA INSERTS

A line of inserts with a 80° cutting corner angle, and three cutting tips. These inserts have a neutral rake angle, and a relief angle of .

Carbide Grade(s):

Uncoated carbide grade, suitable for continuous cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of sintered steels.
Uncoated carbide grade, suitable for continuous or interrupted cutting of grey & chilled cast iron, sintered steels, Ni-/Co-/Fe-based alloys, Stellite™, and titanium.
Uncoated carbide grade, suitable for interrupted cutting of grey cast iron, ductile graphite iron, and chilled cast iron.
Suitable for continuous cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), cold worked & hot formed tool steels (up to 64 HRC), and hardened sintered steels.
Suitable for continuous or interrupted cutting of certain hardened steels in the 45-72 HRC range, including: Low-alloy tool steels (up to 68 HRC), and high-alloy & powdered steels (up to 72 HRC).
Suitable for interrupted cutting of most hardened steels in the 45-72 HRC range, including: Ball bearing & spring steels (from 45 HRC), low-alloy tool steels (up to 68 HRC), high-alloy & powdered steels (up to 72 HRC), and cold worked & hot formed tool steels (up to 64 HRC).